VOLVO
CEM-U004500 - Extended CAN Communication Bus (-) shorted to Bus (+). General Failure Information. No sub type information
Układ
Centralny moduł elektroniczny (CEM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
2 modeleV40 (2013–), V40 Cross Country (2013–)
Pokaż modele wg rocznika i silnika (2)
Co oznacza ten kod błędu?
The fault code means that the two wires in the extended CAN network are short-circuited to each other. Messages between the control modules then become wrong or stop, and the park assist camera, blind spot system and cross traffic alert may stop working.
Możliwe przyczyny
- The two CAN wires in the extended network touch each other, for example at a chafed spot
Co możesz zrobić
- 1Read the fault codes in all control modules, clear them and road test the car to see whether they return
- 2Switch the ignition off and inspect the two wires for chafing and pinch damage, especially where they lie close together
- 3With the battery negative lead disconnected, use a multimeter to confirm the wires do not touch. Twist the harness during the test
- 4If the short cannot be seen, have a workshop with diagnostic equipment check the network. Replace the CEM only when fault-finding points to it
Objawy, które możesz zauważyć3
- Park assist camera does not work
- Blind spot monitoring (BLIS) does not function
- Cross Traffic Alert (CTA) does not work
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.
Częste kombinacje usterek
CEM-B102608
CEM-B108B23
CEM-U004500
CEM-B102608, CEM-B108B23, CEM-U004500 Volvo V70 / XC60 P3 – CEM Spänningsbortfall
VOLVO • 238 analiz
CEM-B10874A
CEM-B10884A
CEM-U004500
CEM-B10874A, CEM-B10884A, CEM-U004500 Volvo V70 / XC70 P3 – CEM LIN-Buss & Klämma 15
VOLVO • 156 analiz