VOLVO
CEM-U101E00 - Lost Communication With Parking Assistance Camera (PAC). General Failure Information. No sub type information
Układ
Centralny moduł elektroniczny (CEM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
4 modeleS60 (2011–), V60 (2011–), V60 Cross Country (2015–), XC60 (2009–)
Pokaż modele wg rocznika i silnika (4)
Co oznacza ten kod błędu?
The fault code means that the control module storing the fault cannot reach the parking camera control module (PAC), or the link is disturbed. The parking camera then does not work. The fault concerns the network and may lie in the wiring or in the camera module itself.
Możliwe przyczyny
- No voltage supply to the parking camera module (PAC)
- Broken ground wire to the PAC
- Contact resistance in the connections
- Open or shorted CAN wiring
- A module not intended for the car, such as a used unit with other software or hardware
Co możesz zrobić
- 1Check that the parking camera fuse is intact
- 2Check the power wire to the PAC for shorts and breaks, and the ground wire for breaks
- 3Check the connections to the PAC for contact resistance and oxidation
- 4If the fault returns, have a workshop with diagnostic equipment check the CAN wiring in the extended network
Objawy, które możesz zauważyć1
- Park assist camera does not work
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.