VOLVO
CEM-U210753 - Collision Mitigation By Braking. System Programming Failures. Deactivated
Układ
Centralny moduł elektroniczny (CEM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
9 modeliS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Co oznacza ten kod błędu?
The central electronic module (CEM) constantly monitors collision mitigation by braking. The fault is stored when the signal from FSM, ECM or BCM is wrong. The function is then deactivated, and the brake pedal may need more force than normal. The code points to the module that is sending the wrong signal.
Możliwe przyczyny
- The fault most likely sits in the sending unit, for example the front sensing unit (FSM), the engine ECM or the brake BCM
Co możesz zrobić
- 1If you have a diagnostic tool, read the codes in the forward sensing module, engine control module and brake control module and clear those first
- 2Clear the code in the CEM after the other codes have been dealt with, then road test to see whether it returns
- 3Safety: the braking system must work fully, so do not drive with a brake pedal that feels abnormally hard without having a workshop check it
- 4If the fault returns after the other codes are cleared, have a workshop with diagnostic equipment check the central electronic module (CEM)
Objawy, które możesz zauważyć2
- Collision mitigation and brake assistance do not work
- The brake pedal needs more force than normal
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.