VOLVO
CEM-U210848 - Adaptive Cruise Control. System Internal Failures. Supervision software failure
Układ
Centralny moduł elektroniczny (CEM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
2 modeleV40 (2013–), V40 Cross Country (2013–)
Pokaż modele wg rocznika i silnika (2)
Co oznacza ten kod błędu?
On the V40, the CEM constantly monitors the adaptive cruise control system. The fault is stored while the engine runs when the signal from FSM, ECM or BCM is wrong. The code points to another module as the cause, and cruise control cannot be engaged while the fault is present.
Możliwe przyczyny
- The fault most likely sits in the sending unit, for example the front sensing unit (FSM), the engine ECM or the brake BCM
Co możesz zrobić
- 1If you have a diagnostic tool, read the codes in the forward sensing module, engine control module and brake control module and clear those first
- 2Clear the code in the CEM once the other faults are dealt with, then road test to see whether it returns
- 3While the fault is present cruise control cannot be used, so drive with full attention and keep your own distance
- 4If the fault returns after the other codes are cleared, have a workshop with diagnostic equipment check the central electronic module (CEM)
Objawy, które możesz zauważyć2
- Warning symbol and text message in the display
- Cruise control cannot be engaged
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.