Przejdź do treści
    OBD Tuning
    WYŚLIJ DO NAS
    WYŚLIJ DO NAS
    Strona główna
    Kody błędów
    VOLVO
    CEM-U300049
    VOLVO

    CEM-U300049 - Control Module. System Internal Failures. Internal electronic failure

    Układ

    Centralny moduł elektroniczny (CEM)

    Modele Volvo, których dotyczy ten kod błędu

    Dotyczy następujących modeli:

    2 modele

    V40 (2013–), V40 Cross Country (2013–)

    Pokaż modele wg rocznika i silnika (2)
    • Volvo V40 (2013–)2013–2015
    • Volvo V40 Cross Country (2013–)2013–2015

    Co oznacza ten kod błędu?

    The CEM checks its outputs for short circuits that could harm the module. The fault is stored when an output has been short-circuited so many times, or with short circuits that were never fixed, that its service life is used up. The output is then permanently disabled, and clearing the code does not help.

    Możliwe przyczyny

    • Internal fault in the CEM due to unrectified or recurring short circuits on the same output

    Co możesz zrobić

    1. 1If you have a diagnostic tool, read the codes in the CEM and note any other codes relating to short circuits on outputs
    2. 2Fix the cause of the short circuit first: look for chafing, pinch damage and damaged connectors on the wiring to the function that does not work
    3. 3Use a multimeter to check that the wiring has no contact with earth (the body) or voltage where it should not be
    4. 4Safety: if the airbag warning lamp is involved, have a workshop check the airbag system; do not work on it yourself
    5. 5Once the cause is fixed, have a workshop replace the central electronic module (CEM), since the output cannot be restored

    Objawy, które możesz zauważyć5

    • The engine does not crank or does not start
    • Tail light or brake light does not work
    • Front or rear turn signals do not work
    • Cabin heating is absent or slow to warm up
    • The supplemental restraint system (SRS) warning lamp comes on or behaves abnormally

    Na co może wpływać usterka1

    • The output causing the fault is permanently disabled and cannot be activated again

    Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.

    OBD Tuning

    Wiodące centrum ekspertów Szwecji w elektronice motoryzacyjnej. Oferujemy profesjonalną optymalizację silnika, naprawę sterowników i diagnostykę z gwarancją 12 miesięcy.

    Usługi

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    Baza danych & Diagnostyka

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    Producenci ECU

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Firma

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    Odwiedź nas

    Gjuterigatan 29, Karlstad

    Zadzwoń do nas

    054-830 480

    Napisz do nas

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Wszelkie prawa zastrzeżone.