Przejdź do treści
    OBD Tuning
    WYŚLIJ DO NAS
    WYŚLIJ DO NAS
    Strona główna
    Kody błędów
    VOLVO
    CEM-U300801
    VOLVO

    CEM-U300801 - Control Module Ground "A". General Failure Information. General electrical failure

    Układ

    Centralny moduł elektroniczny (CEM)

    Modele Volvo, których dotyczy ten kod błędu

    Dotyczy następujących modeli:

    4 modele

    S80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)

    Pokaż modele wg rocznika i silnika (4)
    • Volvo S80 (2007–)2007–2010
    • Volvo V70 (2008–)2008–2010
    • Volvo XC60 (2009–)2009–2010
    • Volvo XC70 (2008–)2008–2010

    Co oznacza ten kod błędu?

    The CEM has two earth connections, one for electronics and one for power. The fault is stored when the electronics earth has no connection to the car body, which can make some functions, such as the instrument panel, stop working.

    Możliwe przyczyny

    • Contact resistance or oxidation in the terminals
    • Open circuit in the earth cable

    Co możesz zrobić

    1. 1Check the earth connection at the module and at the body: it should be tight and free from rust and dirt
    2. 2Follow the earth cable from the module to the body and look for breaks, chafing and loose connectors
    3. 3Use a multimeter to check that the earth cable is connected to the body; if it is not, have a workshop repair the connection
    4. 4Reconnect connectors and components, switch the ignition on and check that the instrument panel works as it should
    5. 5Clear the code and road test; if it returns, have a workshop check the body earth connection

    Objawy, które możesz zauważyć3

    • The combined instrument panel does not work
    • The front seat power adjustment does not work
    • The passenger compartment lighting does not work

    Na co może wpływać usterka3

    • The function turns off during the driving cycle in which the fault is detected
    • If the fault stays present over many driving cycles the function is switched off permanently
    • Erasing the trouble codes and starting a new driving cycle resets the function

    Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.

    OBD Tuning

    Wiodące centrum ekspertów Szwecji w elektronice motoryzacyjnej. Oferujemy profesjonalną optymalizację silnika, naprawę sterowników i diagnostykę z gwarancją 12 miesięcy.

    Usługi

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    Baza danych & Diagnostyka

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    Producenci ECU

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Firma

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    Odwiedź nas

    Gjuterigatan 29, Karlstad

    Zadzwoń do nas

    054-830 480

    Napisz do nas

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Wszelkie prawa zastrzeżone.