Przejdź do treści
    OBD Tuning
    WYŚLIJ DO NAS
    WYŚLIJ DO NAS
    Strona główna
    Kody błędów
    VOLVO
    CPM-4308
    VOLVO

    CPM-4308 - Engine coolant heater. Extinguished flame

    Układ

    Ogrzewanie postojowe (CPM)

    Modele Volvo, których dotyczy ten kod błędu

    Dotyczy następujących modeli:

    5 modeli

    C30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)

    Pokaż modele wg rocznika i silnika (5)
    • Volvo C30 (2007–2013)2007–2013
    • Volvo C30 Electric (2011–2013)2011–2013
    • Volvo C70 (2006–2013)2006–2013
    • Volvo S40 (2004–2013)2004–2012
    • Volvo V50 (2004–2013)2004–2012

    Co oznacza ten kod błędu?

    The heater has gone out in an impermitted way while running at full output, which sets the code and switches the heater off. The cause may be a damaged fuel supply or air pockets in the fuel line, an intake pipe in the fuel tank that has moved out of position, or a clogged or damaged flame sensor.

    Możliwe przyczyny

    • Damaged fuel supply or air pockets in the fuel line
    • The intake pipe to the fuel tank has moved out of position
    • Flame sensor clogged with soot
    • Damaged flame sensor

    Co możesz zrobić

    1. 1Check that the tank has enough fuel for the heater to run at full output
    2. 2Clear the code and start the heater again; if the code returns, the fault is still present
    3. 3If you have a diagnostic tool, read whether a flame was detected once the heater has finished running, and note whether it went out earlier
    4. 4Look for damaged or pinched fuel lines and for signs of air in the fuel line; fuel line work should be done by a workshop
    5. 5If the fault returns, have a workshop check the intake pipe in the fuel tank, the flame sensor and the combustion air flow

    Objawy, które możesz zauważyć2

    • Poor heating in the passenger compartment
    • The parking heater does not work

    Na co może wpływać usterka2

    • When the code is set the heater is switched off
    • If the heater is started again, it makes a new start attempt

    Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.

    OBD Tuning

    Wiodące centrum ekspertów Szwecji w elektronice motoryzacyjnej. Oferujemy profesjonalną optymalizację silnika, naprawę sterowników i diagnostykę z gwarancją 12 miesięcy.

    Usługi

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    Baza danych & Diagnostyka

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    Producenci ECU

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Firma

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    Odwiedź nas

    Gjuterigatan 29, Karlstad

    Zadzwoń do nas

    054-830 480

    Napisz do nas

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Wszelkie prawa zastrzeżone.