VOLVO
CRM-2023 - Position encoder 17, front roof. Invalid position
Układ
Podwozie (Hamulce, układ kierowniczy, zawieszenie)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
1 modelC70 (2006–2013)
Pokaż modele wg rocznika i silnika (1)
Co oznacza ten kod błędu?
The roof control module has registered that the position sensor in the front roof section shows a position that does not match the expected one. The voltage to the sensor is also outside the approved range. The roof can then be operated only in a limited way or not at all. The fault is caused by a damaged or incorrectly fitted sensor.
Możliwe przyczyny
- Position sensor not working
- Position sensor incorrectly fitted
Co możesz zrobić
- 1With the ignition on, test the roof in both directions. See whether it stops or moves unevenly.
- 2Check whether the position sensor is worn or damaged, and whether it moves freely in its position.
- 3Check that the position sensor is correctly fitted and secure.
- 4If the sensor is damaged or incorrectly fitted and cannot be corrected, have a workshop replace it.
- 5After the work, check that the roof can be operated in both directions.
Objawy, które możesz zauważyć1
- The roof cannot be operated, or only in a limited way
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.