VOLVO
CRM-2064 - Position encoder 2, rear roof. Activation timeout
Układ
Podwozie (Hamulce, układ kierowniczy, zawieszenie)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
1 modelC70 (2006–2013)
Pokaż modele wg rocznika i silnika (1)
Co oznacza ten kod błędu?
Position sensor 2 in the rear roof section has not reached the expected value within a certain time. The roof may then move slowly or not at all. Which value is expected depends on the direction the roof is moving in. The cause may be a damaged or displaced sensor, or a mechanical part preventing the roof from moving.
Możliwe przyczyny
- Damaged position sensor
- Position sensor 2 that has moved out of position
- Mechanical part preventing the roof from moving
Co możesz zrobić
- 1With the ignition off, check that position sensor 2 is firmly fixed and that its connector has no looseness or oxidation.
- 2Examine position sensor 2 for wear and damage, and check that the part of the roof the sensor reads has not shifted.
- 3If you have a diagnostic tool: run the roof back and forth and check that the position sensor value changes in live data.
- 4If no fault is visible, have a workshop try replacing position sensor 2 and then calibrate the roof.
Objawy, które możesz zauważyć2
- The roof moves slowly or not at all when opened and closed
- A text window with a warning symbol or a text message on the display
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.