VOLVO
CRM-20E1 - Hall sensor 16. Shorted to supply
Układ
Podwozie (Hamulce, układ kierowniczy, zawieszenie)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
1 modelC70 (2006–2013)
Pokaż modele wg rocznika i silnika (1)
Co oznacza ten kod błędu?
Hall sensor 16 draws less current than normal, and no sensor pulse appears when the hydraulic pump for the roof runs. This points to the wire from the sensor to the roof control module being shorted to voltage, although a damaged sensor or a fault inside the control module can also cause the code.
Możliwe przyczyny
- The wire between hall sensor 16 and the roof control module is shorted to voltage
- Damaged hall sensor
- Internal fault in the roof control module (CRM)
Co możesz zrobić
- 1Read out and clear the fault code, test the roof in both directions and see whether the fault returns
- 2Check that the connector at hall sensor 16 is firmly fitted and free from oxidation
- 3With a multimeter you can check that the wire from hall sensor 16 has no contact with voltage
- 4If no fault is found in the wire, hall sensor 16 may need replacing, which a workshop should do
- 5If the fault remains, a workshop needs to check the roof control module
Objawy, które możesz zauważyć2
- No or limited roof operation
- Message in the text display
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.