VOLVO
CRM-2101 - Hall sensor 9. Shorted to supply
Układ
Podwozie (Hamulce, układ kierowniczy, zawieszenie)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
1 modelC70 (2006–2013)
Pokaż modele wg rocznika i silnika (1)
Co oznacza ten kod błędu?
The power consumption of hall sensor 9 is lower than normal. When the hydraulic pump for the roof is activated, no sensor pulse appears, which points to a short to voltage in the signal wire between the sensor and the control module. A damaged sensor or a fault inside the control module can also cause the code.
Możliwe przyczyny
- The signal wire between hall sensor 9 and the roof control module is shorted to voltage
- Damaged hall sensor
- Internal fault in the roof control module (CRM)
Co możesz zrobić
- 1Read out and clear the fault code, test the roof in both directions and see whether the fault returns
- 2Check that the connector to hall sensor 9 is firmly fitted and free from oxidation or loose connections
- 3With a multimeter you can check that the wire from hall sensor 9 has no contact with voltage
- 4If no fault is found in the wire, hall sensor 9 may need replacing, which a workshop should do
- 5If the fault remains, a workshop needs to check the roof control module
Objawy, które możesz zauważyć2
- No or limited roof operation
- Message in the text display
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.