VOLVO
CRM-6011 - Valve 1. Signal too high/signal too low
Układ
Podwozie (Hamulce, układ kierowniczy, zawieszenie)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
1 modelC70 (2006–2013)
Pokaż modele wg rocznika i silnika (1)
Co oznacza ten kod błędu?
The signal to hydraulic valve 1 is too high or too low. The fault arises when the wire between the roof control module (CRM) and the hydraulic valve has an open circuit or is shorted to ground or voltage, or when the valve itself does not work. The movement of the roof may then be limited.
Możliwe przyczyny
- Open circuit in the wire between the roof control module and the hydraulic valve
- The wire between the roof control module and the hydraulic valve is shorted to ground or voltage
- The hydraulic valve does not work, with an internal short to ground
- Internal fault in the roof control module (CRM)
Co możesz zrobić
- 1Read out and clear the fault code, test the roof and see whether the fault comes back
- 2Check only the wires to the hydraulic valve that the fault code refers to
- 3With a multimeter you can check the wires for an open circuit and for a short to ground or voltage
- 4If a fault is found in the wire, replace the wire. If nothing is found, the hydraulic pump may need replacing by a workshop
- 5If the fault remains, a workshop needs to check the roof control module
Objawy, które możesz zauważyć2
- No or limited roof operation
- Message in the text display
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.