VOLVO
CRM-C072 - Catch motor. Motor blocked
Układ
Podwozie (Hamulce, układ kierowniczy, zawieszenie)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
1 modelC70 (2006–2013)
Pokaż modele wg rocznika i silnika (1)
Co oznacza ten kod błędu?
The catch motor is not working, so the catch it controls cannot move as it should. The fault can be caused by a faulty or disconnected motor, a catch blocked mechanically, or an open circuit in the wire to the roof control module. A failed hall sensor or an internal fault in the control module can also cause the code.
Możliwe przyczyny
- The catch motor is not working
- The catch is blocked mechanically
- The catch motor is disconnected
- Open circuit in the wire between the catch motor and the roof control module
- The hall sensor is not working
- Internal fault in the roof control module (CRM)
Co możesz zrobić
- 1Read out and clear the fault code and check whether it returns
- 2Make sure nothing nearby, such as an object or a damaged part, is blocking the catch
- 3With a multimeter you can check that the wire to the catch motor has no break
- 4If you have a diagnostic tool, activate the catch motor and check that the position in live data switches between locked and unlocked
- 5If no fault is found, a workshop should check the hall sensor and replace the catch motor if needed
Objawy, które możesz zauważyć2
- No or limited roof operation
- Message in the text display
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.