VOLVO
DDM-001B - Driver's door lock. Signal too low
Układ
Moduł drzwi kierowcy (DDM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
5 modeliS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Co oznacza ten kod błędu?
The driver's door control module has registered that the signal is too low on both the locking and the unlocking signal wires for too long. The cause may be a faulty lock switch, or both signal wires being shorted to ground. The lock then cannot be operated with the key from the driver's door.
Możliwe przyczyny
- Faulty lock switch
- Both lock and unlock signal wires shorted to ground
Co możesz zrobić
- 1Try locking and unlocking the driver's door with the key and note whether the lock moves at all
- 2Use a multimeter to check that the wires between the door control module and the driver's door lock have no contact with ground (the body), for both locking and unlocking
- 3If a short is found, or the lock still cannot be operated, have a workshop repair the wiring or replace the lock switch
- 4Press the lock button in the door and check that it returns fully when released
Objawy, które możesz zauważyć1
- The lock cannot be operated with the key from the driver's door
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.