VOLVO
DDM-003A - Camera module voltage supply Signal too high
Układ
Moduł drzwi kierowcy (DDM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
5 modeliC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Co oznacza ten kod błędu?
The driver's door control module has registered that the signal on the supply wire to the camera in the driver's side door mirror is too high. The wire is shorted to voltage, so the LED does not light. A message may appear in the text display.
Możliwe przyczyny
- Supply wire to the camera shorted to voltage
Co możesz zrobić
- 1Start the engine and check whether the LED flashes three times when the BLIS system is activated
- 2Use a multimeter to check that the camera's supply wire has no contact with voltage while the ignition is off
- 3If a short is found, the wire needs repairing, which a workshop should do
- 4If the code does not return, no further action is needed, as the fault was most likely intermittent
Objawy, które możesz zauważyć2
- The LED does not light
- Message in the text display
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.