VOLVO
DDM-004C - Control module. Internal fault
Układ
Moduł drzwi kierowcy (DDM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
5 modeliS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Co oznacza ten kod błędu?
The window position has never been initialized in the control module, because the first initialization was not done at the factory. Automatic window operation therefore does not work until the window has been initialized.
Możliwe przyczyny
- The window position has not been initialized
Co możesz zrobić
- 1Read out and note the fault code, clear it, then with ignition on press the window switch two steps up to check that automatic window operation works
- 2Bring the window up to its top stop using manual control
- 3Start an initialization of the window. During initialization the window goes down automatically and then rises again. From model year 2003 it only lowers a short way
- 4If the fault remains after initialization, have a workshop check the control module
Objawy, które możesz zauważyć1
- The automatic window operation does not work
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.