VOLVO
DDM-B11B815 - Driver Blind Spot Warning Indicator Supply. General Electrical Failures. Circuit short to battery or open
Układ
Moduł drzwi kierowcy (DDM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
4 modeleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Pokaż modele wg rocznika i silnika (4)
Co oznacza ten kod błędu?
The fault is stored when the output signal to the driver-side camera is too high. On cars with the blind spot system (BLIS) a camera is fitted in each external mirror. The cause can be a supply cable short-circuited to voltage or an open circuit, and the LED then does not light.
Możliwe przyczyny
- Supply cable short-circuited to voltage
- Open circuit in the supply cable
Co możesz zrobić
- 1Read out and note the fault code, clear it, then test drive the car to see if it returns
- 2With ignition off, use a multimeter to check that the supply cable to the camera has no contact with plus and is not broken. Replace the cable if it is damaged
- 3Check the connectors in the driver's side mirror for oxidation and loose contacts
- 4If you have a diagnostic tool, activate the blind spot system on the driver's side and check whether the camera responds
- 5If no fault is found, have a workshop check the camera in the driver's side mirror
Objawy, które możesz zauważyć2
- LED does not light
- A message appears in the information display
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.