VOLVO
DDM-B12DA13 - Blind Spot Warning Indicator. General Electrical Failures. Circuit open
Układ
Moduł drzwi kierowcy (DDM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
5 modeliS60 (2011–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–)
Co oznacza ten kod błędu?
The driver door module monitors the supply to the LED in the mirror that signals when something is in the blind zone beside the car. The fault is stored when the supply wire to the LED is broken, so the warning in the mirror does not work.
Możliwe przyczyny
- Open circuit in the supply wire to the LED
Co możesz zrobić
- 1Check that the fuses are intact
- 2Check whether the warning lamp in the mirror lights when a vehicle passes through the blind spot
- 3Inspect the cable from the door to the mirror for chafing, especially where it bends
- 4Use a multimeter to check that the wire to the LED is not broken
- 5Read and clear the code and road test to see whether it returns
- 6If the fault remains, have a workshop with diagnostic equipment check the wire, the control module and the mirror
Objawy, które możesz zauważyć3
- The LED in the mirror does not light up
- A message is shown in the text display
- The blind spot warning lamp lights up or behaves abnormally
Na co może wpływać usterka1
- The warning for objects in the blind spot does not work
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.