Przejdź do treści
    OBD Tuning
    WYŚLIJ DO NAS
    WYŚLIJ DO NAS
    Strona główna
    Kody błędów
    VOLVO
    DDM-B12E902
    VOLVO

    DDM-B12E902 - Rear Window Local Up/Down Switch. General Failure Information. General signal failure

    Układ

    Moduł drzwi kierowcy (DDM)

    Modele Volvo, których dotyczy ten kod błędu

    Dotyczy następujących modeli:

    5 modeli

    S60 (2011–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–)

    Pokaż modele wg rocznika i silnika (5)
    • Volvo S60 (2011–)2011–2015
    • Volvo V40 (2013–)2013–2015
    • Volvo V40 Cross Country (2013–)2013–2015
    • Volvo V60 (2011–)2011–2015
    • Volvo V60 Cross Country (2015–)2015

    Co oznacza ten kod błędu?

    The driver and passenger door modules continuously check the signal from the switch for the electric window lift of the rear window. The fault is stored when the signal from the switch has been active for a long time, for example if the switch is stuck, or when the signal wire has been short-circuited to ground for a long time. The module then ignores the signal until the switch is no longer pressed.

    Możliwe przyczyny

    • The switch is stuck in the pressed position
    • The signal wire is short-circuited to ground
    • Moisture and/or oxidation in the connections
    • The local window switch is damaged

    Co możesz zrobić

    1. 1Check that the switch in the door can be pressed in and released, and that it is not stuck
    2. 2Check that the fuses are intact
    3. 3Test the other window switches in the door and see whether only the switch for the rear window fails
    4. 4Check the connector to the switch for moisture and oxidation
    5. 5Use a multimeter to check that the signal wire has no contact with ground
    6. 6If the fault remains, have a workshop with diagnostic equipment check the switch and the control module

    Objawy, które możesz zauważyć1

    • The window lift does not work, works only partly or works incorrectly

    Na co może wpływać usterka1

    • The signal from the switch is ignored until it is no longer pressed

    Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.

    OBD Tuning

    Wiodące centrum ekspertów Szwecji w elektronice motoryzacyjnej. Oferujemy profesjonalną optymalizację silnika, naprawę sterowników i diagnostykę z gwarancją 12 miesięcy.

    Usługi

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    Baza danych & Diagnostyka

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    Producenci ECU

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Firma

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    Odwiedź nas

    Gjuterigatan 29, Karlstad

    Zadzwoń do nas

    054-830 480

    Napisz do nas

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Wszelkie prawa zastrzeżone.