VOLVO
DDM-B1B7087 - LIN Bus Circuit #2. Bus Signal / Message Failures. Missing message
Układ
Moduł drzwi kierowcy (DDM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
4 modeleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Pokaż modele wg rocznika i silnika (4)
Co oznacza ten kod błędu?
The driver door module waits for messages from the cameras on the left and right sides over LIN bus 2. The fault is stored when no signal is received, which can be caused by a break in the communication wire, a short circuit to ground or supply voltage, or a poor connection in the connectors.
Możliwe przyczyny
- Open circuit in the communication wire
- The communication wire is short-circuited to ground
- The communication wire is short-circuited to supply voltage
- Contact resistance or oxidation in the connections
- Open circuit in the connections
- Short circuit in the connections
Co możesz zrobić
- 1Read and clear the code and road test to see whether it returns
- 2Check that the fuses are intact
- 3Check the wire between the driver door module and the cameras for visible damage
- 4Check that the connectors at the driver door and the cameras are secure and free from moisture and oxidation
- 5Use a multimeter to check that the communication wire has no break and no contact with ground or supply voltage
- 6If the fault remains, have a workshop with diagnostic equipment check the communication with the cameras
Objawy, które możesz zauważyć1
- An LED does not light up
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.