VOLVO
DDM-DD22 - LIN communication camera module Internal fault
Układ
Moduł drzwi kierowcy (DDM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
5 modeliC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Co oznacza ten kod błędu?
The driver door module communicates over LIN with the camera on the driver side of the car, which is part of the blind spot information system (BLIS). The fault is stored when the module registers an internal fault in the LIN communication with the camera, and the cause lies in the camera in the driver door.
Możliwe przyczyny
- Fault inside the driver-side camera
Co możesz zrobić
- 1Check that the fuses are intact
- 2Start the engine and check that the LEDs in the blind spot system flash when the system is activated
- 3Check that the connectors at the camera are secure and free from moisture
- 4If the fault was stored once and does not return, no action is needed
- 5If the fault remains, have a workshop with diagnostic equipment replace the camera on the affected side
Objawy, które możesz zauważyć2
- An LED does not light up
- A message is shown in the text display
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.