VOLVO
DDM-DD30 - Communication with camera module Internal Fault
Układ
Moduł drzwi kierowcy (DDM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
5 modeliC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Co oznacza ten kod błędu?
The driver door module communicates over LIN with the camera in the driver door, which is part of the blind spot information system (BLIS). The fault is stored when the module registers that communication with the camera is not possible, and the cause is an internal fault in the camera.
Możliwe przyczyny
- Fault inside the driver-side camera
Co możesz zrobić
- 1Check that the fuses are intact
- 2Start the engine and see whether the LEDs flash when the blind spot system is activated
- 3Inspect the wires between the driver door and the camera for chafing and visible damage
- 4If the code does not return after a road test, no action is needed, as it was most likely temporary
- 5If the fault remains, have a workshop with diagnostic equipment replace the camera
Objawy, które możesz zauważyć2
- An LED does not light up
- A message is shown in the text display
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.