DDM-U210000 - Initial Configuration Not Complete. General Failure Information. No sub type information
Układ
Moduł drzwi kierowcy (DDM)
Modele Volvo, których dotyczy ten kod błędu
Ten kod błędu ma różne znaczenie w zależności od modelu, rocznika lub silnika. Wybierz znaczenie, które dotyczy Twojego samochodu.
Dotyczy następujących modeli:
5 modeliS60 (2011–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–)
Co oznacza ten kod błędu?
The driver or passenger door module (DDM/PDM) should receive the vehicle's configuration data from the central electronic control module (CEM) over the CAN network. The code is stored when that information is missing, or when a wrong value persists for too long. The fault points to a communication problem with the CEM, so troubleshooting starts there. The code is erased automatically when the configuration arrives again.
Możliwe przyczyny
- Break in the CAN network
- Communication wire shorted to ground or to voltage
- Contact resistance, oxidation or a loose connection in the connections
Co możesz zrobić
- 1Read and note the codes in all control modules, since several codes can be related
- 2Check that the fuses are intact
- 3Check the connectors in the driver door and at the central electronic control module (CEM) for loose contacts, chafing and corrosion
- 4Use a multimeter to check that the communication wires have no contact with ground (the body) when they are disconnected at both ends
- 5If the code does not clear, have a workshop with diagnostic equipment check the CAN network and the CEM
Objawy, które możesz zauważyć5
- The child lock does not work
- Locking and unlocking with the central locking does not work
- Electric adjustment of the door mirrors does not work
- The window lift is inoperative, reduced or behaves incorrectly
- Automatic memory adjustment of the door mirrors does not work
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.