Co oznacza kod błędu DEM-P064F05?

Diagnostyka i definicja kodu błędu dla DEM-P064F05 (Volvo S60 (2011–), Volvo S80 (2007–), Volvo V40 Cross Country (2013–)). Zamów naprawę w OBD Tuning.

VOLVO

DEM-P064F05 - Unauthorized Software/Calibration Detected. General Failure Information. System Programming Failures

Układ

Moduł napędu na cztery koła AWD (DEM)

Modele Volvo, których dotyczy ten kod błędu

Dotyczy następujących modeli:

9 modeli

S60 (2011–), S80 (2007–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)

Pokaż modele wg rocznika i silnika (12)

Co oznacza ten kod błędu?

The module checks its configuration ID against the signal configuration that the CEM transmits. When they do not match, it is probably running software that does not suit this car. The fault can also be caused by breaks or short circuits on the CAN network. The four-wheel drive is disengaged, and the remedy is to load the correct software.

Możliwe przyczyny

Incorrect software in the four-wheel drive control module (DEM)

Co możesz zrobić

1Read the codes in all control modules and note whether any other communication code is stored
2If the four-wheel drive control module has been replaced, tell the workshop that it may need the right software for this particular car
3Check that the CAN wires and connectors are intact and clean, and that nothing has chafed
4Have a workshop load the right software into the four-wheel drive control module and erase the code afterwards

Objawy, które możesz zauważyć2

Four-wheel drive and all-wheel drive do not work
Warning symbol and message in the display

Na co może wpływać usterka1

The four-wheel drive is disengaged

Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.