DEM-P093215
VOLVO
DEM-P093215 - Hydraulic pressure sensor circuit. General electrical fault. Short circuit to a voltage source or open circuit.
Układ
Moduł napędu na cztery koła AWD (DEM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
4 modeleS80 (2007–), V70 (2008–), XC70 (2008–), XC90 (2003–)
Pokaż modele wg rocznika i silnika (6)
Co oznacza ten kod błędu?
The module judges whether the oil pressure sensor reading is believable. The code is stored when the signal rises above the highest permitted value, which can be caused by a short to voltage or a break in the sensor circuit. Poor contact or a damaged sensor may also be behind it. The four-wheel drive works less well and is disengaged.
Możliwe przyczyny
- Contact resistance and oxidation in the connectors
- Damaged oil pressure sensor
- Damaged oil pressure and oil temperature sensor
- Damaged control module
Co możesz zrobić
- 1Read and erase the code, then road test to see whether it returns
- 2Check that the connector to the oil pressure sensor is secure and free from oxidation
- 3Check the wire to the sensor for damage, such as chafing or pinching
- 4If the code returns, have a workshop with diagnostic equipment check the sensor and the control module, and replace whatever is damaged
Objawy, które możesz zauważyć1
- The four-wheel drive works worse than normal
Na co może wpływać usterka1
- The four-wheel drive is disengaged
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.