Przejdź do treści
    OBD Tuning
    WYŚLIJ DO NAS
    WYŚLIJ DO NAS
    Strona główna
    Kody błędów
    VOLVO
    DEM-P188E01
    VOLVO

    DEM-P188E01 - Oil Pressure Pump Control Circuit. General Failure Information. General electrical failure

    Układ

    Moduł napędu na cztery koła AWD (DEM)

    Modele Volvo, których dotyczy ten kod błędu

    Dotyczy następujących modeli:

    8 modeli

    S60 (2011–), S80 (2007–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)

    Pokaż modele wg rocznika i silnika (8)
    • Volvo S60 (2011–)2013–2015
    • Volvo S80 (2007–)2013–2015
    • Volvo V40 Cross Country (2013–)2013–2015
    • Volvo V60 (2011–)2013–2015
    • Volvo V60 Cross Country (2015–)2015
    • Volvo V70 (2008–)2013–2015
    • Volvo XC60 (2009–)2013–2015
    • Volvo XC70 (2008–)2013–2015

    Co oznacza ten kod błędu?

    The current in the control circuit to the oil pressure pump is outside the expected range, and the four-wheel drive control module (DEM) detects this while driving. The cause can be an electrical fault in the cable, such as a short to voltage or to ground, or an internal leak in the pump.

    Możliwe przyczyny

    • Damaged connector between the oil pressure pump and the control module
    • Voltage supply cable shorted to voltage
    • Voltage supply cable shorted to ground
    • Open circuit or short to ground in the cable
    • Internal leak in the oil pressure pump
    • Damaged oil pressure pump

    Co możesz zrobić

    1. 1Read off the fault code, note it and clear it. Test drive the vehicle to see if the fault returns
    2. 2Check that the fuses are intact; their locations are in the owner's manual or on the fuse box cover
    3. 3Follow the wiring between the control module and the pump for chafing, pinched areas and loose clips, and check the connector at both ends
    4. 4Use a multimeter to confirm the cable has no contact with ground (body). With the ignition on, also check whether the cable has voltage when it should not
    5. 5If you have a diagnostic tool, read the pump current in live data with the engine running and check whether the value is steady or jumps
    6. 6Have a workshop check the pump and replace it if it is damaged, and calibrate the control module after the change

    Objawy, które możesz zauważyć2

    • Four-wheel drive does not work
    • Warning symbol and text message in the display

    Na co może wpływać usterka1

    • Four-wheel drive is disengaged for as long as the fault is present

    Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.

    OBD Tuning

    Wiodące centrum ekspertów Szwecji w elektronice motoryzacyjnej. Oferujemy profesjonalną optymalizację silnika, naprawę sterowników i diagnostykę z gwarancją 12 miesięcy.

    Usługi

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    Baza danych & Diagnostyka

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    Producenci ECU

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Firma

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    Odwiedź nas

    Gjuterigatan 29, Karlstad

    Zadzwoń do nas

    054-830 480

    Napisz do nas

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Wszelkie prawa zastrzeżone.