VOLVO
DEM-U041568 - Invalid Data Received From Anti-Lock Brake System Control Module. Algorithm Based Failures. Event information
Układ
Moduł napędu na cztery koła AWD (DEM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
8 modeliS60 (2011–), S80 (2007–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Co oznacza ten kod błędu?
Although the code is named after the anti-lock brake system control module, the signal concerns the brake control module (BCM), which sends information about the braking system to the four-wheel drive. The code is set when the DEM is told that the information from the BCM is incorrect. It is an event-controlled code, meaning information rather than a fault in the DEM, and the fault should be traced in the brake control module.
Możliwe przyczyny
- Fault in the brake control module (BCM), which sends out incorrect information
Co możesz zrobić
- 1Read off the fault codes in the brake control module first and remedy them. The code is a follow-on fault and can be cleared once the root fault has been remedied
- 2Check that the fuses are intact; their locations are in the owner's manual or on the fuse box cover
- 3If you have a diagnostic tool, read the wheel speeds in live data during a test drive and check that they follow each other at steady speed
- 4The braking system is safety-critical: if the brakes feel different or the fault remains, have a workshop check the brake control module
Objawy, które możesz zauważyć1
- Four-wheel drive does not work
Na co może wpływać usterka1
- Four-wheel drive has reduced function
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.