VOLVO
DIM-0006 - 12-pulse vehicle speed signal. Signal too high. Intermittent fault
Układ
Zestaw wskaźników / Licznik (DIM)
Modele Volvo, których dotyczy ten kod błędu
Ten kod błędu ma różne znaczenie w zależności od modelu, rocznika lub silnika. Wybierz znaczenie, które dotyczy Twojego samochodu.
Dotyczy następujących modeli:
5 modeliC70 Cabriolet (1998–2005), C70 Coupé (1998–2002), S70 (1997–2000), V70 (1997–2000), V70 XC (1998–2000)
Co oznacza ten kod błędu?
Although the code is named for a high signal, it concerns a vehicle speed signal that is shorted to ground. The signal runs from the instrument to the engine control module and on to other receivers, such as the cruise control, the audio system and the climate system. The fault is intermittent, meaning it has occurred before but does not always show.
Możliwe przyczyny
- Vehicle speed signal wire shorted to ground between the instrument panel and the engine control module
- Short to ground in the wire to the cruise control, the audio system or the climate system
Co możesz zrobić
- 1Read off the fault code, note it and clear it. Test drive the vehicle to see if the fault returns
- 2Check that the fuses are intact; their locations are in the owner's manual or on the fuse box cover
- 3Follow the vehicle speed wire from the instrument panel for chafing and pinched areas, and use a multimeter to confirm it has no contact with ground (body)
- 4If you have a diagnostic tool, read the vehicle speed in live data while driving and check that it follows the speedometer
- 5If the fault remains, have a workshop trace the speed signal, which also runs over the CAN network
Objawy, które możesz zauważyć2
- Cruise control does not work at all
- Audio automatic volume control does not work
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.