DIM-000A
VOLVO
DIM-000A - D+ signal. Signal too low. Intermittent fault
Układ
Zestaw wskaźników / Licznik (DIM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
5 modeliC70 Cabriolet (1998–2005), C70 Coupé (1998–2002), S70 (1997–2000), V70 (1997–2000), V70 XC (1998–2000)
Co oznacza ten kod błędu?
The driver information module (DIM) receives no charging signal from the generator when the engine runs at higher revs. The fault is intermittent, meaning it has occurred before but does not always show. The cause may be a break in the signal wire from the generator, or the wire being shorted to ground.
Możliwe przyczyny
- Open circuit in the signal wire from the generator
- Signal wire shorted to ground
- Poor contact in the generator or instrument connector
Co możesz zrobić
- 1Read off the fault code, note it and clear it. Test drive the vehicle to see if the fault returns
- 2Check that the battery terminals are clean and tightly fastened
- 3Check the connectors at the generator and at the instrument for oxidation and loose fit
- 4Follow the signal wire from the generator for chafing and damage, and use a multimeter to confirm it has no contact with ground (body)
- 5If you have a diagnostic tool, check in live data that the charging signal is present with the engine running and disappears when it stops
- 6If the fault remains, have a workshop check the generator and the signal wire
Objawy, które możesz zauważyć1
- The generator warning lamp lights with the engine running
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.