VOLVO
DIM-000B - Outside temperature sensor. Faulty signal. Intermittent fault
Układ
Zestaw wskaźników / Licznik (DIM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
5 modeliC70 Cabriolet (1998–2005), C70 Coupé (1998–2002), S70 (1997–2000), V70 (1997–2000), V70 XC (1998–2000)
Co oznacza ten kod błędu?
The outside temperature sensor sends an incorrect signal to the instrument panel, so the outside temperature is not shown correctly or not at all. The fault is intermittent, meaning it has occurred before but does not always show. The causes may be poor contact, an open circuit in the signal wire, a short to ground or voltage, or a faulty sensor.
Możliwe przyczyny
- Contact resistance in the connections
- Signal wire shorted to ground or voltage
- Open circuit in the signal wire
- Faulty outside temperature sensor
Co możesz zrobić
- 1Read off the fault code, note it and clear it. Test drive the vehicle to see if the fault returns
- 2Check that the fuses are intact; their locations are in the owner's manual or on the fuse box cover
- 3Check the sensor and instrument connectors for oxidation and loose fit
- 4Use a multimeter to confirm the signal wire to the sensor has no contact with ground (body) or voltage
- 5If you have a diagnostic tool, read the sensor value in live data. If the value is missing or unrealistic, the sensor or the wire is at fault
- 6If the fault remains, have a workshop replace the sensor once the wire has been checked
Objawy, które możesz zauważyć1
- The outside temperature display shows no value
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.