Co oznacza kod błędu DIM-B102687?

Diagnostyka i definicja kodu błędu dla DIM-B102687 (Volvo S80 (2007–)). Zamów naprawę w OBD Tuning.

VOLVO

DIM-B102687 - Steering Column Lock. Bus Signal / Message Failures. Missing message

Układ

Zestaw wskaźników / Licznik (DIM)

Modele Volvo, których dotyczy ten kod błędu

Dotyczy następujących modeli:

1 model

S80 (2007–)

Pokaż modele wg rocznika i silnika (1)

Volvo S80 (2007–)2007

Co oznacza ten kod błędu?

The instrument panel module (DIM) switches the relay that powers the ignition lock control unit (SCU). The central electronic module (CEM) asks the DIM over the CAN network to supply the SCU. If communication with the CEM is lost, the code is set. The steering lock then cannot lock or unlock, and the engine does not start.

Możliwe przyczyny

Open circuit in the communication cable
Communication cable shorted to ground
Communication cable shorted to voltage
Contact resistance, oxidation or open circuit in the connections

Co możesz zrobić

1Check that the fuses are intact; their locations are in the owner's manual or on the fuse box cover
2Test drive the vehicle to see if the fault returns. Clear the fault code only after the wiring has been checked
3Check the connectors in the communication cable for oxidation and loose fit, and follow the cable for chafing and pinched areas
4Use a multimeter to confirm the communication cable has no contact with ground or voltage
5The steering lock is a safety function: do not work on it yourself. If the fault remains, have a workshop check the steering lock and the control unit

Objawy, które możesz zauważyć2

The steering lock does not lock or unlock
The engine does not start

Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.