VOLVO
DIM-B115C71 - Transfer fuel pump. Mechanical Failures. Actuator stuck
Układ
Zestaw wskaźników / Licznik (DIM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
9 modeliS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Co oznacza ten kod błędu?
Although the code is named for a transfer fuel pump, it concerns the fuel level sensor in the tank. The instrument has noticed that the fuel gauge level does not change during a longer drive, and the code is then set. The cause is that the sensor has jammed, and the gauge may then show a value that is too high or too low.
Możliwe przyczyny
- Fuel level sensor has jammed
Co możesz zrobić
- 1Read off the fault code, note it and clear it. Test drive the vehicle to see if the fault returns
- 2Check that the fuses are intact; their locations are in the owner's manual or on the fuse box cover
- 3If you have a diagnostic tool, read the fuel level in live data and check whether the value changes when you refuel
- 4If the fault remains, have a workshop check the fuel level sensor in the tank
Objawy, które możesz zauważyć2
- Fuel gauge shows a value that is too high
- Fuel gauge shows a value that is too low
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.