VOLVO
DIM-C200262 - Odometer tampered. Algorithm Based Failures. Signal compare failure
Układ
Zestaw wskaźników / Licznik (DIM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
9 modeliS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Co oznacza ten kod błędu?
The instrument panel module (DIM) works out the total distance from signals sent by several other modules in the vehicle. If one of the signals is marked as invalid, the code is set. The odometer reading may then be incorrect, and the cause should be investigated before anything is changed.
Możliwe przyczyny
- Internal fault in another control module on the same part of the CAN network
- No CAN communication
Co możesz zrobić
- 1Switch the ignition off and on, then read the fault code again so that a new test runs
- 2Read off the fault codes in the other control modules. If there are internal memory faults there, remedy them first and follow those fault-finding steps
- 3Check the connectors to the central electronic module and the door modules for oxidation and loose fit
- 4Clear the fault code and try reading it again, to see whether it returns
- 5If the fault remains, have a workshop establish the cause, as this may require replacing the instrument panel
Objawy, które możesz zauważyć1
- Gauges and trip odometer show faults or do not work
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.