Co oznacza kod błędu DIM-U001000?

Diagnostyka i definicja kodu błędu dla DIM-U001000 (Volvo S60 (2011–), Volvo S80 (2007–), Volvo V60 (2011–)). Zamów naprawę w OBD Tuning.

VOLVO

DIM-U001000 - Medium Speed CAN Communication Bus. General Failure Information. No sub type information

Układ

Zestaw wskaźników / Licznik (DIM)

Modele Volvo, których dotyczy ten kod błędu

Dotyczy następujących modeli:

6 modeli

S60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)

Pokaż modele wg rocznika i silnika (7)

Co oznacza ten kod błędu?

The instrument communicates on the medium-speed CAN network (MS-CAN), one of the vehicle's CAN networks. The code is set when communication is disturbed by another control module on the network, or by the instrument's own messages. The instrument may then switch off or stop working.

Możliwe przyczyny

Short circuit between the CAN wires
Open circuit in one of the CAN wires
Internal fault in another control module on the same part of the CAN network
Damaged instrument panel module (DIM)

Co możesz zrobić

1Read off the fault codes, note them and clear them. Test drive the vehicle to see if the fault returns
2Check that the fuses are intact; their locations are in the owner's manual or on the fuse box cover
3Follow the CAN wiring between the instrument and the other control modules for chafing and pinched areas
4If you have a diagnostic tool, read which control modules respond on the network and note whether any are missing
5If the fault remains, have a workshop measure the MS-CAN network and locate the control module that disturbs communication

Objawy, które możesz zauważyć1

The combined instrument panel does not function

Na co może wpływać usterka1

The instrument shuts down and remains inactive until its power is cut and reconnected

Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.