VOLVO
DIM-U019900 - Lost Communication With Driver door module. General Failure Information. No sub type information
Układ
Zestaw wskaźników / Licznik (DIM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
6 modeliS60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Co oznacza ten kod błędu?
The instrument cluster (DIM) gets no reply from the driver door module (DDM), which among other things sends information to the instrument cluster. Communication between them has stopped, so functions controlled from the driver door may show faults in the instrument cluster.
Możliwe przyczyny
- Break in the communication wire
- The communication wire is shorted to earth
- The communication wire is shorted to supply voltage
- Poor contact, oxidation or breaks in the connections
Co możesz zrobić
- 1Read and note the fault codes, clear them and road test the car to see whether the fault returns
- 2Check the fuses in the fuse box. Their location is in the owner's manual or the fuse list
- 3The driver door module often controls the window regulator and the door lock. Check whether they work, as this helps show where the fault is
- 4Check that the wiring harness to the driver door is not chafed or pinched, especially where it enters the door
- 5If the driver door has recently been worked on, check that all connectors are properly reconnected
- 6If the fault returns, have a workshop with diagnostic equipment check the module and the CAN network
Objawy, które możesz zauważyć1
- The BLIS blind spot monitoring is not working
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.