VOLVO
DIM-U040268 - Invalid Data Received from TCM. Algorithm Based Failures. Event information
Układ
Zestaw wskaźników / Licznik (DIM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
9 modeliS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Pokaż modele wg rocznika i silnika (10)
- Volvo S60 (2011–)2014–2015
- Volvo S80 (2007–)2014–2015
- Volvo V40 (2013–)2013–2015
- Volvo V40 Cross Country (2013–)2013–2015
- Volvo V60 (2011–)2013Tylko silnik: D82PHEV
- Volvo V60 (2011–)2014–2015
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2014–2015
- Volvo XC60 (2009–)2014–2015
- Volvo XC70 (2008–)2014–2015
Co oznacza ten kod błędu?
The instrument cluster (DIM) receives signals from the transmission control module (TCM) with a lower quality than it can accept, so the gear indicator may show the wrong gear or not work. The fault usually lies in the transmission control module and not in the instrument cluster.
Możliwe przyczyny
- The fault probably lies in the transmission control module (TCM)
Co możesz zrobić
- 1Check that the fuses are intact and that the connectors to the instrument cluster and the transmission control module are fully engaged and not corroded
- 2Road test the car and note whether the gear indicator matches the selected gear, and when the fault occurs
- 3Read the fault code with a diagnostic tool, clear it and check whether it returns
- 4If the code returns, have a workshop with diagnostic equipment investigate the transmission control module, since the signal comes from there
- 5Do not replace the instrument cluster until a workshop has shown the fault lies there
Objawy, które możesz zauważyć1
- The gear indicator in the instrument cluster does not work or shows the wrong gear
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.