VOLVO
DIM-U210000 - Control Module Not Configured. General Failure Information. No sub type information
Układ
Zestaw wskaźników / Licznik (DIM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
9 modeliS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Co oznacza ten kod błędu?
The instrument cluster (DIM) has found that it is not configured for the car. Because the information about the car's configuration is missing, some warnings, gauges and functions may show faults. The fault can be caused by the software in the instrument cluster or in the central electronic module, and
Możliwe przyczyny
- The instrument cluster is not configured for the car
Co możesz zrobić
- 1Read the fault codes and check whether the code for the central electronic module (CEM) is also stored, as the configuration may come from there
- 2Check that the fuses are intact. Their location is in the owner's manual or the fuse list
- 3Check that the connectors to the instrument cluster and to the central electronic module are fully engaged
- 4Have a workshop check and, if needed, load new software into the central electronic module and then into the instrument cluster
- 5After the workshop has done this, switch the ignition off, switch it on again and check that the code does not return
Objawy, które możesz zauważyć4
- A warning lamp comes on or behaves abnormally
- A text or warning symbol appears in the instrument cluster
- The trip computer does not work
- One or more gauges show faults or do not work
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.