VOLVO
ECM-000A - Atmospheric pressure signal of control unit. Internal fault. Permanent fault.
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
4 modeleS70 (1997–2000), S80 (1999–2006), V70 (1997–2000), V70 (2000–2008)
Co oznacza ten kod błędu?
The engine control module has found a fault in its reference voltage for atmospheric pressure, and the fault is permanent, meaning it is present right now. It is an internal fault in the engine control module. The engine may stall or fail to start, and the module then uses substitute values for air pressure.
Możliwe przyczyny
- Fault in the engine control module reference voltage
Co możesz zrobić
- 1Read the fault codes and clear them. If the code comes straight back the fault is still present, and the engine control module is the likely cause
- 2Check that the fuses for the engine control module are intact and that the connectors are fully engaged and clean
- 3Avoid driving the car until a workshop has assessed whether it is safe to drive, since the engine may stall or fail to start
- 4Replacing the engine control module is a workshop task, and the new module must be programmed for the car
- 5Have a workshop with diagnostic equipment confirm the fault before the module is replaced
Objawy, które możesz zauważyć2
- The engine stalls
- The engine does not start
Na co może wpływać usterka2
- Only basic boost pressure is allowed
- The air pressure value is calculated from the boost pressure
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.