Przejdź do treści
    OBD Tuning
    WYŚLIJ DO NAS
    WYŚLIJ DO NAS
    Strona główna
    Kody błędów
    VOLVO
    ECM-0039
    VOLVO

    ECM-0039 - Turbocharger (TC) control system. Flow too low

    Układ

    Sterownik silnika (ECM)

    Modele Volvo, których dotyczy ten kod błędu

    Dotyczy następujących modeli:

    4 modele

    S70 (1997–2000), S80 (1999–2006), V70 (1997–2000), V70 (2000–2008)

    Pokaż modele wg rocznika i silnika (4)
    • Volvo S70 (1997–2000)1999–2000Tylko silnik: D5252T MSA 15.8
    • Volvo S80 (1999–2006)1999–2001Tylko silnik: D5252T MSA 15.8
    • Volvo V70 (1997–2000)1999–2000Tylko silnik: D5252T MSA 15.8
    • Volvo V70 (2000–2008)2000–2001Tylko silnik: D5252T MSA 15.8

    Co oznacza ten kod błędu?

    The engine control module compares the desired and actual boost pressure from the turbocharger. If the difference becomes too large, the fault is stored, which usually means the turbo is delivering too little pressure. Common causes are air leakage in the intake, a blocked catalytic converter or exhaust system, and a defective turbocharger.

    Możliwe przyczyny

    • Air leakage in the intake system
    • Blocked catalytic converter or exhaust system
    • Defective turbocharger

    Co możesz zrobić

    1. 1Check that the hoses to the turbocharger control valve and the hose between the boost pressure sensor and the intake manifold are secure, not leaking and not blocked
    2. 2Check the intake system for leaks, for example at hose connections and at the air filter housing
    3. 3If you have a diagnostic tool, activate the turbocharger control valve and listen for a click from the valve
    4. 4If you have a diagnostic tool, compare the desired and actual boost pressure in live data during a test drive and see whether they follow each other
    5. 5If the fault remains, have a workshop measure the boost pressure and check the turbocharger and the catalytic converter

    Objawy, które możesz zauważyć1

    • Poor acceleration, the engine feels sluggish

    Na co może wpływać usterka1

    • Boost pressure is limited to a basic value

    Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.

    OBD Tuning

    Wiodące centrum ekspertów Szwecji w elektronice motoryzacyjnej. Oferujemy profesjonalną optymalizację silnika, naprawę sterowników i diagnostykę z gwarancją 12 miesięcy.

    Usługi

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    Baza danych & Diagnostyka

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    Producenci ECU

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Firma

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    Odwiedź nas

    Gjuterigatan 29, Karlstad

    Zadzwoń do nas

    054-830 480

    Napisz do nas

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Wszelkie prawa zastrzeżone.