VOLVO
ECM-0118 - Engine coolant temperature (ECT) sensor. Signal too high
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
4 modeleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Pokaż modele wg rocznika i silnika (18)
- Volvo C30 (2007–2013)2007–2009Tylko silnik: B4164S3, B4184S11, B4184S8, B4204S3, D4204T
- Volvo C30 (2007–2013)2010Tylko silnik: B4164S3, B4184S11, B4184S8, B4204S3, B4204S4, D4204T
- Volvo C30 (2007–2013)2011–2012Tylko silnik: B4164S3, B4204S3, B4204S4
- Volvo C30 (2007–2013)2013Tylko silnik: B4204S3, B4204S4
- Volvo C70 (2006–2013)2008Tylko silnik: D4204T
- Volvo C70 (2006–2013)2009–2010Tylko silnik: D4204T · Tylko skrzynia biegów: MMT6, MPS6
- Volvo S40 (2004–2013)2004Tylko silnik: D4204T, D4204T2
- Volvo S40 (2004–2013)2005Tylko silnik: B4164S3, B4184S11, D4204T, D4204T2
- Volvo S40 (2004–2013)2006Tylko silnik: B4164S3, B4184S11, B4184S8, D4204T, D4204T2
- Volvo S40 (2004–2013)2007–2009Tylko silnik: B4164S3, B4184S11, B4184S8, B4204S3, D4204T
- Volvo S40 (2004–2013)2010Tylko silnik: B4164S3, B4184S11, B4184S8, B4204S3, B4204S4, D4204T
- Volvo S40 (2004–2013)2011–2012Tylko silnik: B4164S3, B4204S3, B4204S4
- Volvo V50 (2004–2013)2004Tylko silnik: D4204T, D4204T2
- Volvo V50 (2004–2013)2005Tylko silnik: B4164S3, B4184S11, D4204T, D4204T2
- Volvo V50 (2004–2013)2006Tylko silnik: B4164S3, B4184S11, B4184S8, D4204T, D4204T2
- Volvo V50 (2004–2013)2007–2009Tylko silnik: B4164S3, B4184S11, B4184S8, B4204S3, D4204T
- Volvo V50 (2004–2013)2010Tylko silnik: B4164S3, B4184S11, B4184S8, B4204S3, B4204S4, D4204T
- Volvo V50 (2004–2013)2011–2012Tylko silnik: B4164S3, B4204S3, B4204S4
Co oznacza ten kod błędu?
The engine control module has registered a coolant temperature signal that is too high. The cause is most often a signal wire touching supply voltage, but a damaged sensor or control module, an extremely low engine temperature, or an incorrect reference voltage can also cause it.
Możliwe przyczyny
- Signal wire shorted to supply voltage
- Damaged engine coolant temperature sensor
- Very low engine coolant temperature
- Incorrect reference voltage
- Damaged control module
Co możesz zrobić
- 1With the ignition off, unplug the coolant sensor connector and check the contacts for contact resistance and oxidation
- 2With the ignition on and the connector unplugged, use a multimeter on the signal wire; voltage there indicates a short to supply voltage
- 3If you have a diagnostic tool, read the engine temperature in live data and see whether the value matches how cold or warm the engine is
- 4If the wire is sound and the fault remains, have a workshop check the sensor and the control module
Objawy, które możesz zauważyć1
- Malfunction indicator lamp (MIL) lights up
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.