ECM-0131
VOLVO
ECM-0131 - Front heated oxygen sensor (HO2S), bank 1.Signal too low
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
3 modeleC30 (2007–2013), S40 (2004–2013), V50 (2004–2013)
Pokaż modele wg rocznika i silnika (14)
- Volvo C30 (2007–2013)2007–2009Tylko silnik: B4164S3, B4184S11, B4184S8, B4204S3
- Volvo C30 (2007–2013)2010Tylko silnik: B4164S3, B4184S11, B4184S8, B4204S3, B4204S4
- Volvo C30 (2007–2013)2011–2012Tylko silnik: B4164S3, B4204S3, B4204S4
- Volvo C30 (2007–2013)2013Tylko silnik: B4204S3, B4204S4
- Volvo S40 (2004–2013)2005Tylko silnik: B4164S3, B4184S11
- Volvo S40 (2004–2013)2006Tylko silnik: B4164S3, B4184S11, B4184S8
- Volvo S40 (2004–2013)2007–2009Tylko silnik: B4164S3, B4184S11, B4184S8, B4204S3
- Volvo S40 (2004–2013)2010Tylko silnik: B4164S3, B4184S11, B4184S8, B4204S3, B4204S4
- Volvo S40 (2004–2013)2011–2012Tylko silnik: B4164S3, B4204S3, B4204S4
- Volvo V50 (2004–2013)2005Tylko silnik: B4164S3, B4184S11
- Volvo V50 (2004–2013)2006Tylko silnik: B4164S3, B4184S11, B4184S8
- Volvo V50 (2004–2013)2007–2009Tylko silnik: B4164S3, B4184S11, B4184S8, B4204S3
- Volvo V50 (2004–2013)2010Tylko silnik: B4164S3, B4184S11, B4184S8, B4204S3, B4204S4
- Volvo V50 (2004–2013)2011–2012Tylko silnik: B4164S3, B4204S3, B4204S4
Co oznacza ten kod błędu?
The front oxygen sensor reports a lean mixture where a rich one is expected, or a value below the set limit. The cause is most often a break or a short to ground in the signal wire, but a damaged sensor can also cause the fault.
Możliwe przyczyny
- Break in the signal wire
- Signal wire shorted to ground
- Damaged front oxygen sensor
Co możesz zrobić
- 1With the ignition off, unplug the front oxygen sensor connector and check the contacts for looseness, contact resistance and oxidation
- 2Use a multimeter to check that the signal wire does not break and has no short to ground, moving the wiring as you measure
- 3If the wires are sound and the fault remains, have a workshop replace the front oxygen sensor
Objawy, które możesz zauważyć1
- Malfunction indicator lamp (MIL) lights up
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.