Przejdź do treści
    OBD Tuning
    WYŚLIJ DO NAS
    WYŚLIJ DO NAS
    Strona główna
    Kody błędów
    VOLVO
    ECM-0139
    VOLVO

    ECM-0139 - Rear heated oxygen sensor (HO2S), bank 1. Slow control

    Układ

    Sterownik silnika (ECM)

    Modele Volvo, których dotyczy ten kod błędu

    Dotyczy następujących modeli:

    3 modele

    C30 (2007–2013), S40 (2004–2013), V50 (2004–2013)

    Pokaż modele wg rocznika i silnika (3)
    • Volvo C30 (2007–2013)2007–2012Tylko silnik: B4164S3
    • Volvo S40 (2004–2013)2005–2012Tylko silnik: B4164S3
    • Volvo V50 (2004–2013)2005–2012Tylko silnik: B4164S3

    Co oznacza ten kod błędu?

    The engine control module registers that the rear lambda sensor on bank 1 responds too slowly to changes in the fuel-air mixture and treats this as a fault. The usual reasons are poor contact in the connections or a worn sensor. The fault lights the lamp during driving.

    Możliwe przyczyny

    • Contact resistance and oxidation in the connections
    • Damaged rear lambda sensor

    Co możesz zrobić

    1. 1Read, note and clear the code, then road test
    2. 2Check the rear lambda sensor connector and the wire connection to the control module: is it fully engaged and free from oxidation?
    3. 3Clean oxidized contacts at the connector and make sure the locking tab engages properly
    4. 4If you have a diagnostic tool, watch the rear sensor value in live data while pressing and releasing the accelerator. A slow response confirms the fault
    5. 5If cleaning the contacts makes no difference, have a workshop with diagnostic equipment decide whether the rear lambda sensor should be replaced

    Objawy, które możesz zauważyć1

    • Malfunction indicator lamp (MIL) lit

    Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.

    OBD Tuning

    Wiodące centrum ekspertów Szwecji w elektronice motoryzacyjnej. Oferujemy profesjonalną optymalizację silnika, naprawę sterowników i diagnostykę z gwarancją 12 miesięcy.

    Usługi

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    Baza danych & Diagnostyka

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    Producenci ECU

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Firma

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    Odwiedź nas

    Gjuterigatan 29, Karlstad

    Zadzwoń do nas

    054-830 480

    Napisz do nas

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Wszelkie prawa zastrzeżone.