VOLVO
ECM-0265 - Injector cyl 2. Signal too high
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
3 modeleC30 (2007–2013), S40 (2004–2013), V50 (2004–2013)
Co oznacza ten kod błędu?
The engine control module has registered that the injector for cylinder 2 gives too high a signal and treats this as a fault. The fault can be caused by a signal wire that has come into contact with voltage, or by a damaged injector. The lamp comes on, and the fault has no other consequences for the car.
Możliwe przyczyny
- Signal wire shorted to supply voltage
- Damaged injector, cylinder 2
Co możesz zrobić
- 1Read the fault code, clear it and road test to see whether it returns
- 2Check the connector at the cylinder 2 injector: fully engaged and free from corrosion
- 3With the ignition on and the connector unplugged, use a multimeter to see whether the signal wire picks up voltage
- 4Follow the signal wire to cylinder 2 and look for chafing and pinched sections where it may touch a live wire
- 5If you have a diagnostic tool, compare the cylinder 2 injector value in live data with those of the other cylinders
- 6If the fault returns, have a workshop decide whether the cylinder 2 injector should be replaced
Objawy, które możesz zauważyć1
- Malfunction indicator lamp (MIL) lit
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.