Przejdź do treści
    OBD Tuning
    WYŚLIJ DO NAS
    WYŚLIJ DO NAS
    Strona główna
    Kody błędów
    VOLVO
    ECM-0380
    VOLVO

    ECM-0380 - Glow plug relay. Faulty signal

    Układ

    Sterownik silnika (ECM)

    Modele Volvo, których dotyczy ten kod błędu

    Dotyczy następujących modeli:

    4 modele

    C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)

    Pokaż modele wg rocznika i silnika (10)
    • Volvo C30 (2007–2013)2007Tylko silnik: D4204T
    • Volvo C30 (2007–2013)2008–2010Tylko silnik: D4204T · Tylko skrzynia biegów: MMT6, MPS6
    • Volvo C70 (2006–2013)2008Tylko silnik: D4204T
    • Volvo C70 (2006–2013)2009–2010Tylko silnik: D4204T · Tylko skrzynia biegów: MMT6, MPS6
    • Volvo S40 (2004–2013)2004–2006Tylko silnik: D4204T, D4204T2
    • Volvo S40 (2004–2013)2007Tylko silnik: D4204T
    • Volvo S40 (2004–2013)2008–2010Tylko silnik: D4204T · Tylko skrzynia biegów: MMT6, MPS6
    • Volvo V50 (2004–2013)2004–2006Tylko silnik: D4204T, D4204T2
    • Volvo V50 (2004–2013)2007Tylko silnik: D4204T
    • Volvo V50 (2004–2013)2008–2010Tylko silnik: D4204T · Tylko skrzynia biegów: MMT6, MPS6

    Co oznacza ten kod błędu?

    The engine control module (ECM) controls the glow plugs through a relay in the engine bay relay and fuse box. The fault is set when the circuit to the glow plug relay is outside its normal signal range, and it is checked with the ignition on. The glow plugs help the diesel engine start when it is cold, so the fault is mainly noticed on cold starts.

    Możliwe przyczyny

    • Contact resistance or oxidation in the connections
    • Open circuit or short to ground or voltage in the signal wire to the relay
    • Open circuit or short to ground in the supply wire to the glow plug relay
    • Open circuit or short to voltage in the ground wire
    • Damaged glow plug relay

    Co możesz zrobić

    1. 1Check that the fuses are intact. Their locations are shown in the instruction manual or on the fuse box cover
    2. 2Switch off the ignition and check the connector to the glow plug relay for contact resistance and oxidation
    3. 3Use a multimeter to check that the signal wire to the relay has no open circuit and is not shorted to ground or voltage
    4. 4If you have a diagnostic tool, activate the glow plug relay and listen for it to click when it switches on
    5. 5If the fault remains, have a workshop with diagnostic equipment check the wiring to the glow plugs, as this needs measurement

    Objawy, które możesz zauważyć5

    • The engine is hard to start, especially when cold
    • The engine cranks slowly
    • The engine hesitates, surges or runs roughly, sometimes or all the time
    • Poor performance and lack of power
    • Cruise control does not engage

    Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.

    OBD Tuning

    Wiodące centrum ekspertów Szwecji w elektronice motoryzacyjnej. Oferujemy profesjonalną optymalizację silnika, naprawę sterowników i diagnostykę z gwarancją 12 miesięcy.

    Usługi

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    Baza danych & Diagnostyka

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    Producenci ECU

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Firma

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    Odwiedź nas

    Gjuterigatan 29, Karlstad

    Zadzwoń do nas

    054-830 480

    Napisz do nas

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Wszelkie prawa zastrzeżone.