VOLVO
ECM-042F - EGR control Flow fault. Jammed
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
3 modeleC30 (2007–2013), S40 (2004–2013), V50 (2004–2013)
Pokaż modele wg rocznika i silnika (3)
Co oznacza ten kod błędu?
The control module monitors the function of the EGR valve. A fault in the valve or its wiring that leads to incorrect EGR control produces this code. It is only set, however, when a related EGR fault has already been recorded and the control module's built-in routine for freeing a stuck valve has failed.
Możliwe przyczyny
- Bad contact, resistance or oxidation in the EGR valve connectors
- Dirt or soot making the EGR valve stick
- Open circuit in the cable to the EGR valve
- Cable to the EGR valve shorted to ground or voltage
- Damaged EGR valve
Co możesz zrobić
- 1Switch off the ignition and check the EGR valve connectors for looseness, contact resistance and oxidation
- 2The valve can stick because of soot and dirt. Look for this and have a workshop decide whether it should be cleaned or replaced
- 3Use a multimeter to check that the wires to the EGR valve motor have no open circuit and are not shorted to ground or voltage
- 4If the fault remains, have a workshop with diagnostic equipment check the valve and its wiring
Objawy, które możesz zauważyć1
- The check engine lamp lights or behaves abnormally
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.