ECM-0556
VOLVO
ECM-0556 - Brake booster pressure sensor circuit range/position
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
3 modeleC30 (2007–2013), S40 (2004–2013), V50 (2004–2013)
Pokaż modele wg rocznika i silnika (13)
- Volvo C30 (2007–2013)2007–2009Tylko silnik: B4184S11, B4184S8, B4204S3
- Volvo C30 (2007–2013)2010Tylko silnik: B4184S11, B4184S8, B4204S3, B4204S4
- Volvo C30 (2007–2013)2011–2013Tylko silnik: B4204S3, B4204S4
- Volvo S40 (2004–2013)2005Tylko silnik: B4184S11
- Volvo S40 (2004–2013)2006Tylko silnik: B4184S11, B4184S8
- Volvo S40 (2004–2013)2007–2009Tylko silnik: B4184S11, B4184S8, B4204S3
- Volvo S40 (2004–2013)2010Tylko silnik: B4184S11, B4184S8, B4204S3, B4204S4
- Volvo S40 (2004–2013)2011–2012Tylko silnik: B4204S3, B4204S4
- Volvo V50 (2004–2013)2005Tylko silnik: B4184S11
- Volvo V50 (2004–2013)2006Tylko silnik: B4184S11, B4184S8
- Volvo V50 (2004–2013)2007–2009Tylko silnik: B4184S11, B4184S8, B4204S3
- Volvo V50 (2004–2013)2010Tylko silnik: B4184S11, B4184S8, B4204S3, B4204S4
- Volvo V50 (2004–2013)2011–2012Tylko silnik: B4204S3, B4204S4
Co oznacza ten kod błędu?
The engine control module monitors the pressure in the brake servo. The fault is set when the pressure falls outside its limit value while the engine runs. The causes may be a damaged vacuum system between the non-return valve and the brake servo, or a damaged engine control module.
Możliwe przyczyny
- Damaged vacuum system between the non-return valve and the brake servo
- Damaged engine control module
Co możesz zrobić
- 1Save the fault codes and their values before erasing anything, since erasing removes all fault codes in the engine control module
- 2Start the engine, let it idle for a while, then switch it off and switch the ignition on again
- 3Check the hoses and connections to the brake servo for cracks and leaks
- 4Check the vacuum sensor connector for looseness, contact resistance and oxidation
- 5Because the brake servo is part of the brake system, have a workshop check the vacuum system if a leak is found or the fault remains
Objawy, które możesz zauważyć1
- No noticeable symptoms for the driver
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.