VOLVO
ECM-0557 - Brake booster pressure sensor circuit too low.
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
3 modeleC30 (2007–2013), S40 (2004–2013), V50 (2004–2013)
Co oznacza ten kod błędu?
The engine control module sees the brake servo sensor circuit reading too low while the engine runs, and then sets the fault. The cause may be a wire shorted to ground, damaged wires or connectors, a damaged vacuum system, or a damaged control module.
Możliwe przyczyny
- Wire short-circuited to ground
- Damaged wires or connectors
- Damaged vacuum system between the non-return valve and the brake servo
- Damaged engine control module
Co możesz zrobić
- 1Save the fault codes and their values before erasing anything, since erasing removes all fault codes in the engine control module
- 2Check the vacuum sensor connector for looseness, contact resistance and oxidation
- 3Use a multimeter to check that the wire to the pressure sensor circuit is not shorted to ground and has no open circuit
- 4Check the hoses and connections to the brake servo for leaks
- 5Because the brake servo is part of the brake system, have a workshop check the vacuum system and wiring if the fault remains
Objawy, które możesz zauważyć1
- No noticeable symptoms for the driver
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.