VOLVO
ECM-0617 - Starter motor relay. Signal too high
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
4 modeleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Pokaż modele wg rocznika i silnika (12)
- Volvo C30 (2007–2013)2007–2010Tylko silnik: B4164S3, D4204T
- Volvo C30 (2007–2013)2011–2012Tylko silnik: B4164S3
- Volvo C70 (2006–2013)2008Tylko silnik: D4204T
- Volvo C70 (2006–2013)2009–2010Tylko silnik: D4204T · Tylko skrzynia biegów: MMT6, MPS6
- Volvo S40 (2004–2013)2004Tylko silnik: D4204T, D4204T2
- Volvo S40 (2004–2013)2005–2006Tylko silnik: B4164S3, D4204T, D4204T2
- Volvo S40 (2004–2013)2007–2010Tylko silnik: B4164S3, D4204T
- Volvo S40 (2004–2013)2011–2012Tylko silnik: B4164S3
- Volvo V50 (2004–2013)2004Tylko silnik: D4204T, D4204T2
- Volvo V50 (2004–2013)2005–2006Tylko silnik: B4164S3, D4204T, D4204T2
- Volvo V50 (2004–2013)2007–2010Tylko silnik: B4164S3, D4204T
- Volvo V50 (2004–2013)2011–2012Tylko silnik: B4164S3
Co oznacza ten kod błędu?
The engine control module (ECM) monitors the signal wire to the starter motor relay. If it sees the signal running too high, the code is set. The fault usually shows up when starting: the engine does not start, does not turn over, or there is no click when you try to start it.
Możliwe przyczyny
- Signal wire short-circuited to battery voltage
- Damaged starter motor relay
- Signal wire short-circuited to another supply voltage
Co możesz zrobić
- 1Check the fuses for the starter circuit in the engine bay fuse box, and check that the battery is in good condition
- 2Check that the battery terminals are tight and that the wiring from the starter motor relay is not chafed
- 3With the ignition off, use a multimeter to check that the signal wire to the starter motor relay is not in contact with battery voltage, for example through chafed wiring
- 4If the wiring is intact and the fault remains, the starter motor relay is probably damaged; have a workshop replace it
Objawy, które możesz zauważyć3
- The engine does not start
- The engine does not turn over when starting
- No relay click when you try to start
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.