ECM-0685
VOLVO
ECM-0685 - System relay. Signal missing
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Ten kod błędu ma różne znaczenie w zależności od modelu, rocznika lub silnika. Wybierz znaczenie, które dotyczy Twojego samochodu.
Dotyczy następujących modeli:
4 modeleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Pokaż modele wg rocznika i silnika (10)
- Volvo C30 (2007–2013)2007Tylko silnik: D4204T
- Volvo C30 (2007–2013)2008–2010Tylko silnik: D4204T · Tylko skrzynia biegów: MMT6, MPS6
- Volvo C70 (2006–2013)2008Tylko silnik: D4204T
- Volvo C70 (2006–2013)2009–2010Tylko silnik: D4204T · Tylko skrzynia biegów: MMT6, MPS6
- Volvo S40 (2004–2013)2004–2006Tylko silnik: D4204T, D4204T2
- Volvo S40 (2004–2013)2007Tylko silnik: D4204T
- Volvo S40 (2004–2013)2008–2010Tylko silnik: D4204T · Tylko skrzynia biegów: MMT6, MPS6
- Volvo V50 (2004–2013)2004–2006Tylko silnik: D4204T, D4204T2
- Volvo V50 (2004–2013)2007Tylko silnik: D4204T
- Volvo V50 (2004–2013)2008–2010Tylko silnik: D4204T · Tylko skrzynia biegów: MMT6, MPS6
Co oznacza ten kod błędu?
The ECM checks the signal wire to the system relay coil and sets the code when the signal is missing. The fault shows at start attempts: the engine does not start or turn over, and no click is heard from the relay.
Możliwe przyczyny
- Poor connections, contact resistance or oxidation at the terminals
- Break in the supply to the system relay coil
- Break in the signal wire
- Damaged system relay
Co możesz zrobić
- 1Check the battery voltage and condition, since weak voltage can cause the fault
- 2Check that the generator is charging the battery
- 3Check the connectors at the engine control module and at the system relay for contact resistance and oxidation
- 4Use a multimeter to check the signal wire for an open circuit
- 5If no fault is found and the fault remains, a new system relay can be tried; a workshop should replace it
Objawy, które możesz zauważyć3
- The engine does not start
- The engine does not turn over at start attempts
- No click from the relay when it should engage
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.