VOLVO
ECM-0A09 - Transformer. Signal too low
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
4 modeleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Pokaż modele wg rocznika i silnika (6)
- Volvo C30 (2007–2013)2007–2010Tylko silnik: D4204T
- Volvo C70 (2006–2013)2008–2010Tylko silnik: D4204T
- Volvo S40 (2004–2013)2004–2006Tylko silnik: D4204T, D4204T2
- Volvo S40 (2004–2013)2007–2010Tylko silnik: D4204T
- Volvo V50 (2004–2013)2004–2006Tylko silnik: D4204T, D4204T2
- Volvo V50 (2004–2013)2007–2010Tylko silnik: D4204T
Co oznacza ten kod błędu?
The engine control module (ECM) has logged an internal fault in the voltage converter that powers the piezo-electric injectors. The fault therefore lies either in the control module or in a relay that supplies it. It can cause starting problems and light the check engine lamp.
Możliwe przyczyny
- Damaged system relay
- Damaged engine control module (ECM)
Co możesz zrobić
- 1A workshop should check that the engine control module has the latest software and reload it if needed
- 2Check that the battery is in good condition and its terminals are tight, since voltage disturbances can affect the module
- 3If the fault remains after the software check, the engine control module is probably damaged and a workshop should replace it
- 4If the fault is permanent, a damaged system relay may also be the cause; have a workshop check it
Objawy, które możesz zauważyć2
- Check engine lamp lit or behaving abnormally
- The engine does not start or turn over at start attempts
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.